Home » All » Troubleshooting » Vista » Windows | All Categories

Published on 09.15.08 by Brent Trahan


How-to troubleshoot the Stop Message: Stop 0x77 KERNEL STACK INPAGE ERROR message.

A Stop 0x77 message indicates that a page of kernel data requested from the paging (virtual memory) could not be found or read into memory. Disk hardware failure, data corruption, or virus activity can also cause this message.

Resolving the Problem

Before you can fix this problem you need to figure out what caused it. This will help out a lot when troubleshooting the problem.

  1. Check for bad sectors on your hard drive by running check disk.
  2. If you’re using a SCSI disk, check the cabling and make sure it’s properly terminated.
  3. Check your memory for defects. Try running the memory diagnostics tool.
  4. You might also want to check for scratches or cracks on your motherboard.

Still need help? Ask your computer question now.

Related Guides:

Leave a Reply

Subscribe to this guide's comments RSS feed.

Microsoft Windows is a registered trademark of Microsoft Corporation. Microsoft Corporation in no way endorses or is affiliated with MAXIMUMpcguides.com. All other products mentioned are registered trademarks of their respective companies. MAXIMUMpcguides IS NOT RESPONSIBLE for any damage or data loss to your computer from using this web site. All information on MAXIMUMpcguides is provided on an AS IS basis with NO WARRANTIES.

Copyright 2006-2019 Brent Trahan. All rights reserved.